There are many operations in the load conditions that would be a huge benefit in the weight condition input. Some examples are: 1 Member Area 2 Labels 3 Copy condition 4 Rename condition 5 Remove the conditions from the combination it is deleted 6...

Point 4 of section 6.3.2.2, EN 1993-1-1:2005 states that lateral buckling checks can be omitted if either of the given conditions are satisfied. This is not considered, and results in a slightly higher member UR.

Detailed reports could use more information and equations to make the calculations clearer and validation easier.

Adding a Terminate Collapse button that would print the results for the previous load step as the final load step could be beneficial. This would be separate from the cancel button as the cancel button just stops everything and you do not get sect...

Including the latest version of the SACS release, the pressure loadings applied on plate (as a plate pressure) is getting deleted once the loaded plates are undergoing further meshing. It is evident that meshing of plate is a very important featur...

In the current version, SACS only calculates wake encounter for members that are almost vertical (within 15 degrees) if I enter WE or WD in CDM card. However , the option for NOT nearly vertical members (more than 15 degrees from vertical) is not ...

Currently, I can press Alt and do a column selection in Datagen but I can't replace the values in the selection only. Many text editors like Notepad++ or VScode have this option.

Currently, the deflection/servicability check for the "SPAN" members are only available in saclst report. It would be good for the postview and the and sacsdb (sqlite database) to also include the results.

This way you can see how long each iteration takes.