Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
Status Needs review
Created by Guest
Created on Nov 16, 2026

An option to remove "local P-delta" for NORSOK N-004, ISO 19902, Eurocode

Dear Bentley,

I requested to have an option to remove "local P-delta" effect out from the code check equation when either NORSOK, ISO, Eurocode is chosen.

As explained in the link below, the small delta which is the displacement between the end node of member is estimated by using cubic polynomial equation. This is Geometric Stiffness Matrix Approach.

s://bentleysystems.service-now.com/community?id=kb_article_view&sysparm_article=KB0054275&utm_source=chatgpt.com

When, we apply 2nd order analysis (PD, P2 or PF in Col.17-18 of OPTIONS ), this is included the effect of Global P-DELTA (Displacement at the end node of member) and Local P-delta (Displacement between the end node of member) in those Geometric Stiffness Matrix .

As the effect of local P-delta is already embedded in the industry standard in term of {Cm / (1-N/Ne)} i.e. NORSOK N-004, ISO 19902, see picture.

When, we apply 2nd order analysis, both Global P-Delta and Local P-delta are already included in the internal force and moment.

Then, we should not count the effect of “local P-delta” again in the code-check equation.

SACS already has an option to remove this local P-delta for API i.e. M on Col.34 of OPTIONS. However, it has no option to remove this effect to other codes i.e. NORSOK N-004, ISO 19902, Eurocode.

Therefore, I requested to have an option to remove local P-delta for other codes i.e. NORSOK N-004, ISO 19902.

Thanks !